Solar Panel Installation - A Step by Step Guide

Solar Panel Installation Processes: From initial site analysis and design, all the way to full activation and installation. In essence, home solar panel installation is about knowing what you want and then finding someone who can help you get it. In most cases, residential solar panel installation and operation follow this simple process: First, a survey of your roof's shape, size, and exposure to the sun. Time frame: Generally, this step starts with a site survey, where your installer will go to your house to get a more accurate understanding of your requirements.

Second, solar panel installation technicians will analyze the type of solar cells you have. After which, they'll make their recommendations based on how many square feet and watts you'll need. Once this is decided, the Blue Raven Solar installation crew will set up the solar panels and batteries. And once everything is in place, you're good to go.

Home solar panel installation differs depending on your roof's shape, grade, exposure, and type of solar cells. For example, flat roofs are usually recommended for passive solar power systems as these types of roofs don't need to be pitched or pointed in any particular direction to create optimum exposure. If you have slopes or inclined roofs, make sure you install the panels high enough so that there's plenty of sun during the day. Even partially covered areas will need some exposure to the sun. The best option for this is to have the panels installed on high-sloped roofs where panels are placed perpendicular to the slope and facing south. On slanted roofs, panels could also be installed upside down, as this would allow sunlight to pass through the gap between the panels.

Now that your basic considerations have been made, you can proceed with your solar panel installation. First, locate the direct mounting post for your panel, which is typically located on the highest part of the roof (if applicable). If you're having it professionally installed, find out if you need to remove any shingles or other roof debris during the installation process. You can also click here to get in touch with an expert roofer to inspect your roof and see if it needs any work done.

Now that the mounting system is in place, you can move on to the solar panels themselves. Before you do anything else, connect the direct mounting post to the power source with a wire. You'll want a ground wire in case you have to disconnect the wire later. Connect each individual panel to its mounting system as necessary. Depending on the number of panels you have, this step can take quite some time.

During the solar panel installation process, you'll also want to check your warranty and contact your provider for any special instructions. Also, be sure to set aside enough time for the project to be completed. Do not get intimidated by the size of the project; it's not nearly as large a deal as you might think. It will only take you a couple hours, tops. And once your system is up and running, you'll be able to enjoy the energy savings you've gained. You can learn more about this topic by reading here: https://www.britannica.com/technology/solar-cell.